- Concentrate for cleaners: 10-30 ml/L of distilled water, 5-15 minute cycle
- Safe for gold, silver, titanium, acrylic resins, and optical glass
- Shaver cleaning: 50-80 ml of solution, 3-5 minutes of immersion + 30 sec with the motor running
- Zero foam - does not dampen cavitation in an ultrasonic cleaner
- Shaver cleaner (Vitaclean shaver cleaning agent): 500 ml for cleaning shaver heads and cleaning stations
When you need precision cleaning instead of standard detergent
Regular dish soap or cleaning spray leaves surfactant residue and does not evaporate completely. In precision cleaning, this is a problem: it causes corrosion on electrical connectors, streaks on optics, and dulling of shaver blades. Precision cleaning requires agents that work quickly, evaporate without residue, or are safe for sensitive materials during prolonged contact.
| Application | Proper agent | Why |
|---|---|---|
| Electronics, PCBs, connectors | IPA 70-99% | Rapid evaporation, zero residue |
| Jewelry, watches, glasses | Vitaclean concentrate for ultrasonic cleaners + ultrasonic cleaner | Cavitation reaches crevices without brushing |
| Electric shavers and razors | Vitaclean shaver cleaning agent or Vitaclean ultrasonic cleaner concentrate | Safe for seals and shaver head plastics |
| Degreasing before bonding | IPA 99% or d-limonene oil | Removes grease without leaving a film |
Isopropyl alcohol (IPA): what it's for and how to use it safely
IPA (isopropyl alcohol) is the first-choice agent for cleaning electronics and degreasing. It evaporates within 1-3 minutes, does not conduct electricity once evaporated, and leaves no residue. It is a standard in electronics repair shops, printing houses, and manufacturing.
Electronics, keyboards, PCBs, connectors: When applied to a swab or brush, it removes oxidation from connectors, flux after soldering, grease from keys, and dust from slots. Concentration: 70% (disinfection) or 99% (electronics - minimal water, faster evaporation). Do not use on OLED displays without protection - alcohol may degrade anti-reflective coatings.
Degreasing before gluing or applying tape: The surface must be free of grease for the glue or tape to hold. IPA 99% degreases in seconds. Wait for complete evaporation (30-60 sec) before applying adhesive - alcohol residue weakens the bond.
Cleaning an electric shaver: hygiene, scent, and blade longevity
An uncleaned shaver isn't just a hygiene issue - leftover stubble and sebum between the blades dull them faster than shaving itself. Manufacturers (Braun, Philips, Panasonic) recommend a full cleaning every 1-2 weeks with daily use.
Manual cleaning with Vitaclean shaver cleaning agent:
- Pour 50-80 ml of solution (10 ml Vitaclean + 70 ml water) into a tray or deep bowl.
- Immerse the shaver head for 3-5 minutes.
- Turn on the shaver for 30 seconds while submerged - vibrations will flush out debris from the capillaries between the blades.
- Rinse with clean water and leave with the head open to dry.
Refilling the cleaning station: Cleaning stations (Braun Clean&Charge, Philips SmartClean) use dedicated cartridges costing 30-50 PLN each. You can use Vitaclean shaver cleaning agent instead of expensive replacement fluids - fill the station's tank with a diluted solution (20 ml/200 ml of water).
Ultrasonic cleaner: what can be cleaned and how to choose a concentrate
An ultrasonic cleaner generates micro-cavitation bubbles that implode against the surface of the cleaned object with enough force to tear away layers of dirt. Key: the appropriate concentrate must not dampen cavitation (no foam, neutral pH, no inhibitors).
| Item | Vitaclean dosage | Cycle time | Notes |
|---|---|---|---|
| Gold and silver jewelry | 10-15 ml/L | 5-10 min | Distilled water is mandatory |
| Watches (without WR seal) | 10 ml/L | 3-5 min | Case and bracelet only - not the dial |
| Glasses (mineral and organic lenses) | 10 ml/L | 2-3 min | Shorter cycle for AR coatings |
| Shaver heads | 20-30 ml/L | 5-8 min | Stronger solution for grease and sebum |
| Small mechanical parts | 20-30 ml/L | 10-15 min | Check water resistance of seals |
Common mistakes and safety rules
| Mistake | Consequence | Proper approach |
|---|---|---|
| Tap water in the ultrasonic cleaner | Calcium dampens cavitation, residue on items | Distilled or demineralized water |
| Too long a cycle for glasses coatings | Degradation of AR or anti-static coating | Max 3 minutes for glasses with coatings |
| IPA on OLED displays | Discoloration or degradation of the polarizer | Special screen wipes or water |
| Foaming agent in an ultrasonic cleaner | Foam dampens cavitation - zero effect | Only low-foaming agents like Vitaclean ultrasonic cleaner concentrate |
| Jewelry with glued stones in the cleaner | Cavitation may loosen stones in glued settings | Only mechanically set (clamped) stones |
Vitaclean for precision cleaning
Concentrate for ultrasonic cleaners and shaver fluid. pH neutral. Made in Germany.
Cleaner concentrate - 1x1000 ml ->Shaver fluid - 500 ml ->Set 2x1000 ml ->Frequently asked questions
Which concentrate for an ultrasonic cleaner?
Vitaclean ultrasonic cleaner concentrate: pH neutral, zero foam, no cavitation inhibitors. 10-30 ml per liter of distilled water. Safe for gold, silver, titanium, resins, and optical glass.
What are the Vitaclean ratios for an ultrasonic cleaner?
10-20 ml/L for jewelry and glasses. 20-30 ml/L for shavers and heavily soiled items. Always use distilled water - tap water dampens cavitation.
Can I clean gold and silver in an ultrasonic cleaner?
Solid gold and silver - yes. Avoid jewelry with glued stones (risk of loosening the setting), pearls, and coral. Mechanically set stones - you can, but use a shorter cycle of 3-5 min.
How to clean an electric shaver with Vitaclean fluid?
50-80 ml of solution (10 ml Vitaclean + water) in a tray. Immerse the head for 3-5 min. Turn on the shaver for 30 sec while submerged. Rinse with clean water and dry with the head open.
Can I clean glasses with AR coatings in a cleaner?
Yes - a short cycle of 2-3 minutes and 10 ml/L of solution. AR coatings are resistant when using the right concentrate. Avoid alkaline agents and alcohol on AR coatings.
How often should I clean my electric shaver?
Rinse with water after every shave. Perform a full Vitaclean cleaning once a week or every 2 weeks. Dried stubble and sebum between the blades dull the blades faster than shaving itself.
How do I degrease electronics before repair or gluing?
Isopropyl alcohol (IPA) 70-99%. Evaporates in 1-3 minutes, zero residue. For connectors, PCBs, housings, and surfaces before tape or glue. Before gluing, wait for full evaporation (30-60 sec).
